Alat Uji Kincup Roda Portable

Portable Side Slip Tester

C-2059-1 it's portable single side slip tester, to turn the wheelbarrow, it is leaned to one side and the wheelbarrow rolls around in the direction of the lean. Just like when riding a motorcycle, the motorcycle is leaned into a corner, and the rolling action of the change in profile of the tyre, directs the motorcycle around the corner.


The curved shape of the tyre means that the section in contact with the ground has a smaller radius than when upright, causing the tyre to roll in the direction of the lean, hence turning the wheelbarrow, or motorcycle. This is a similar action caused by Camber on a motor vehicle.

[ Download ]


A Side Slip measurement and adjustment is purely a confirmation that the combinations of angles set during the wheel alignment, will provide a condition where the tyres will roll forward on the road surface without slipping sideways.


Side Slip Tester Portable on TestingAIf there has been no change to the wheel alignment through accident or damage, then performing a Side Slip test and adjustment is generally all that is necessary to correct accelerated tyre wear. The misconception that Side Slip is the same as Toe In/Out is quite common, as the specifications can appear similar

Fitur Alat:
  • A portable measuring gauge plate for trucks with 1.000kg/wheel
  • Portable, ultra-flat design
  • cale with millimeter divisions
  • Low drive
  • Measuring Range: ± 15mm/m
  • Sideslip Board Dimensions: 950 x 385 x 24mm
  • Weight of plate: 21Kg
  • Indicator: Analog display
  • Driving: 5km/h

Certificate Products

Produk-produk yang kami tawarkan telah memenuhi standar peralatan Nasional maupun International, BSN/KAN, ISO9001, ISO14001, CE, EC, dan Kemitraan dengan Distributor Indonesia

Our Office

Jalan Kayumanis-AMD28. No.32 Condet Jakarta Timur 13530 Indonesia

visitor counter