Indicator Scales

Aksesoris Timbangan Truck Portable

RWS adalah platform penimbangan ganda (axle load) yang dirancang untuk membangun stasiun penimbangan untuk memeriksa bobot MST (Muatan Sumbu Terberat) kendaraan. RWS juga memungkinkan untuk menghitung berat kendaraan yang sedang melintasi dengan menjumlahkan berbagai sumbu, ditimbang saat diam atau bergerak. RWS telah mendapatkan persetujuan CE Directive 2014/31/EU untuk verifikasi berat gandar.

RWS terhubung pada indikator display bobot gabungan, as roda kendaraan dapat ditimbang saat diam atau bergerak. Produk ini dibuat dan dirancang oleh teknisi handal dari italia, sehingga kualitas dan hasil ukur tidak diragukan lagi.

"AF09": SOFTWARE FOR 3590E/CPWE INDICATORS FOR AXLE WEIGHING

1. Clearing.
2. Preconfigurable Tare.
3. Totalisation functions:
1. Manual axle weighing and totalization.
2. Automatic static axle weighing and totalization.
3. Automatic dynamic axle weighing and totalization.
4. Two available functioning modes:
1. Checking the weight of the vehicle with printing of the axle and overall total weighs.
2. Axle totalisation with input/output function.
5. Input/output weighs' storage through ID CODE or VEHICLE PLATE (up to 999 suspended weighs).
6. Fully configurable keyboard functions according to customer requirements.
7. 15 configurable and printable ID texts containing each 32 characters (example: Code, Lot ID, operator ID, shift number, etc.).
8. Database of 500 customers, each with three 25-character alphanumeric descriptions.
9. Database of 500 articles, each with two 20-character alphanumeric descriptions.
10. Database of 500 vehicles, each with a 10-character value of the plate, a 20-character alphanumeric description, and a linked tare.
11. 6 levels of re-settable and independently printable totals: partial total, general total, grand total, customer total, article total and vehicle total.
12. Fully programmable printout from the keypad or PC (using the free Dinitools software), with the weight of each axle as well as the total weight of the vehicle. 30 print formats can be combined with various functions (PRINT-key , totalisation, customer total, article total and vehicle total, Partial total, General total, Grand total ...); each print format may contain up to 2048 positions which may be ASCII codes or preconfigured print blocks (i.e. Company name, lot and weigh progressive numbers, gross weight, tare, net, etc.).

DGT100: MAXI WEIGHT INDICATOR - UNIVERSAL REPEATER

1. Functional 5-key waterproof keypad.
2. Large 6-digit display, 100 mm high, with very efficient SMD LEDs, complete of 6 Leds for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd.
3. Software adjustment of the brightness intensity by keyboard.
4. AISI 304 stainless steel case with IP68 protection complete of wall fixing bracket.
5. Fitted with an anti condensation air valve for regulating the humidity and the pressure inside the indicator.
6. Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
7. Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/e in CE-M approved version for legal for trade use.
8. Max. 800.000 displayable divisions viewable with internal resolution up to 3.000.000 points.
9. Up to 8 signal linearisation points with DINITOOLS.
10. A/D 24 bit sigma-delta 4-channel conversion, max.400 conv./sec. with automatic selection.
11. Connectable with up to 8 analogue load cells with 350 Ohm input resistance.
12. Management of a weighing system with up to 4 cells with digital equalisation or management of up to 4 independent weighing systems.
13. Power supply from 12 to 24 Vdc with 110-240 Vac internal power supplier.
14. Available as Scale or as Repeater version.